AUTOMATIC CONTROLLER
This automatic control system is used to make and maintain optimum cultivation conditions for the
plants in the greenhouse. Required data for the automatic controller are collected by various detectors.
These detectors are supplied as accessories, which include a digital temperature sensor, a rain sensor,
a thermostat and others. The detected information is then transferred and processed by the climate control
program. This program commands the vent winder to operate the designated controller to open the vents
to achieve the greenhouse's optimum temperature condition.
Model | Channel | Main characteristic | |
Auto Temperature mode | Time mode | ||
TTC Series | 1 | 1 Temperature in 1 Period of time | Set up open and close time |
WTVC Series | 1 | 5 Temperatures in 5 Periods of time | |
WTDC Series | 2 | 5 Temperatures in 5 Periods of time |
Auto temperature mode can auto execute each periods times with different
temperatures based on setting value.
Control Board, Current Converter(AC→DC24V),
Switches and Output Terminal are integrated.
Each model of the Roll Up Master has a different wattage output per line,
and the maximum number of motors that can be connected is different.
Please check the displayed table to the right for more details.
Standard Accessories
Inner Temperature Sensor |
Thermostat |
Fuse |
Power Cable |
Hanger Set |
Inner Temperature Sensor | Thermostat | Fuse | Power Cable | Hanger Set |
Optional Accessories
Rain Sensor |
Wind Sensor |
Rain Sensor | Wind Sensor |
DRIVE CONTROLLER
This controller is operated by an external signal.
When the external signal is connected to input terminal of Driver and external signal operation is selected,
it is operated by the external signal. Therefore you can gradually install the Roll Up STAR SYSTEM to your
greenhouse Network by Drive system. In addition, this controller has manual function.
Model | Output / line | No. of motors Connections |
D Series | 50W | 2, 4, 6, 8, 12, 16, 20, 24 |
100W | 2, 4, 6, 8, 12 | |
150W | 2, 4, 8 |
Standard Accessories
Fuse |
Power Cable |
Hanger Set |
Fuse | Power Cable | Hanger Set |
MANUAL CONTROLLER
The manual version of the Roll Up Star allows for vent adjustments to be made by toggling the switch lever
to the OPEN, CLOSE or STOP positions.
This controller consists of a Current converter(AC→ DC24V) and individual motor control switches.
Model | Output / line | No. of motors Connections |
RMP Series |
50W | 2, 4, 6, 8, 10, 12, 16, 20, 24 |
100W | 2, 4, 6, 8, 10, 12, 16, 20, 24 | |
150W | 2, 4, 8, 10, 12, 16 |
Standard Accessories
Fuse |
Power Cable |
Hanger Set |
Fuse | Power Cable | Hanger Set |